Sinobakr-Industrial parts washers,Solvent Parts Washers,Vacuum Degreasing Parts Washers-Industrial Ultrasonic Cleaning Machine
2026-11-21 09:37:59

Ultrasonic Cleaning Solution for Automotive Filter Housings


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

During the die-casting and machining of automotive filter housings, die-cast aluminum housings tend to carry die-casting release agents, cutting oil and fine aluminum scraps. Impurities hidden in blind holes, ribs and narrow gaps can hardly be removed thoroughly by manual brushing or high-pressure spraying. Residual aluminum scraps and oil contamination may lead to poor sealing during subsequent assembly, scratch the filter element and cause oil circuit contamination, which are long-standing quality pain points in the mass production of auto parts. Targeted at the working conditions of die-cast aluminum filter housings, Bucker develops a customized industrial ultrasonic cleaning solution. Leveraging the ultrasonic cavitation effect, it achieves deep and all-round cleaning to steadily meet cleanliness control requirements for mass production in the auto parts industry.

The solution is based on the principle of ultrasonic cavitation. Transducers vibrate at high frequency in the cleaning fluid and continuously generate a large number of micro cavitation bubbles. When these bubbles collapse instantly on the workpiece surface, inside blind holes and in tiny gaps, micro impact forces are produced to strip oil films, aluminum scraps, dust and other contaminants firmly attached to the aluminum surface layer by layer. All areas accessible to the cleaning fluid can be cleaned simultaneously, solving the problem that spraying and brushing cannot reach dead corners. Combined with neutral water-based cleaning agent specially formulated for die-cast aluminum, the solution delivers strong degreasing performance while protecting aluminum materials. The cleaning process will not corrode or scratch the housing surface, nor compromise dimensional accuracy or appearance.

The complete cleaning unit is equipped with a constant-temperature heating module and an integrated circulation filtration system. The temperature control system precisely adjusts the temperature of cleaning fluid to improve the emulsification and decomposition efficiency of oil. The circulation pipeline is fitted with a filter pump and precision filter cartridges to continuously filter aluminum scraps and solid contaminants out of the cleaning liquid. This prevents recontamination, extends the service life of the cleaning fluid and ensures consistent cleaning results during long-hour mass production. The equipment can adopt single-tank or multi-tank configurations according to production capacity, matched with rinsing and drying processes. After cleaning, no residual cleaning agent or water stains remain on workpieces, which can be directly sent to the next assembly process.

Compared with traditional cleaning methods, Bucker’s solution boasts prominent advantages. First, the cleanliness is uniform and controllable, with highly consistent cleaning effect on dead corners such as blind holes and intersecting gaps, greatly improving the pass rate of finished products. Second, it is suitable for continuous mass production with large batch processing capacity, which greatly cuts labor input and shortens cleaning cycle time. Third, the process is environmentally friendly. Water-based cleaning replaces highly polluting solvent cleaning for higher operational safety and lower waste liquid treatment costs. Fourth, it adapts to filter housings of different specifications. Ultrasonic power, cleaning duration and temperature parameters can be flexibly adjusted to support the co-line cleaning of multiple housing models.

This solution has been implemented in many auto parts factories. It can be integrated into automatic production lines or used as a standalone unit, fitting both small-batch trial production and large-scale mass production scenarios. The tank body of the equipment is made of thickened SUS316 stainless steel for good resistance to cleaning agent corrosion, long service life, complete electrical protection, stable operation and easy maintenance. Bucker also provides comprehensive technical support including cleaning agent selection, process commissioning, equipment installation training and long-term after-sales warranty. We help customers establish standardized cleaning procedures, stably control cleanliness indicators of filter housings, avoid assembly failure risks originating from the cleaning stage, and assist auto parts manufacturers in complying with strict quality specifications for components.



Prev:CNC High-Pressure Cleaning Machine for NEV Motor Housings
Next:Sinobakr Ultrasonic Cleaning Solution for Automotive Filter Housings

Mobile/WhatsAPP

+8613270982089

sinobakr

WhatsAPP